APAM Aniocic Polyacrylamide
Introduction: Anionic PAM polymer flocculant is mainly used for the treatment of solid minerals in the neutral suspension. APAM is used to improve the removal effect of the suspended solids, COD and phosphate in the urban and industrial wastewater treatment. In the drinking water and wastewater treatment, anionic polyacrylamide is used in the surface water clarification.
APAM adopt the technique of adding alkali in the propenamide and then make them homopolymerization and hydrolysis, after granulation, drying and crushing, it appears as a small white powder of granular solids.
Uses:
1. Anionic polyacrylamide in the treatment of industrial waste water
2. Anionic PAM in the treatment of drinking water
3. The Recovery of the starch loss and grain stillage from a starch plant and an alcohol plant
APAM Specification:
Model |
Molecular Weight (10000) |
Hydrolyzed% |
Solubility |
Solid Content% |
PH Effective Scope |
Residual Monomers |
Appearance |
PAM-AKG-1 |
1800-2500 |
20-30 |
<2 |
≥90 |
7-14 |
≤0.05 |
White powder |
PAM-AKG-2 |
1600-1800 |
20-30 |
<2 |
≥90 |
7-14 |
≤0.05 |
White powder |
PAM-AKG-3 |
1400-1600 |
10-30 |
<2 |
≥90 |
7-14 |
≤0.05 |
White powder |
PAM-AKG-4 |
1200-1400 |
10-30 |
|
≥90 |
7-14 |
≤0.05 |
White powder |
PAM-AKG-5 |
1000-1200 |
8-30 |
|
≥90 |
7-14 |
≤0.05 |
White powder |
PAM-AKG-6 |
800-1000 |
8-30 |
|
≥90 |
7-14 |
≤0.05 |
White powder |
PAM-AKG-7 |
600-800 |
8-30 |
|
≥90 |
7-14 |
≤0.05 |
White powder |